Home / Cars / EarthSense data used to activate zero-emission vehicle

EarthSense data used to activate zero-emission vehicle

EarthSense’s data was to used to put a hybrid vehicle into zero-emission mode as they passed through some of the UK’s most polluted areas

Air quality monitoring technology from EarthSense has provided real time data for trials into the use of low emission vehicles to improve air quality in polluted city centres.

During the trials, EarthSense sensors were mounted in key locations in the city centre as well as on vehicles travelling through the area. Data from the sensors was used to update an air quality model, in real time, which was then used to regulate the vehicle’s emissions in the most polluted/traffic-dominated areas.

The data, collected by both mobile and static EarthSense Zephyr air quality monitoring sensors, was used to automatically activate zero-emission running of hybrid vehicles as they passed through some of the most heavily polluted city streets.

As part of Project ACCRA (Autonomous and Connected vehicles for CleaneR Air), the data was presented at the Clean Smart City Conference; Improving Air Quality Through Vehicle Technology Innovation, held in Leeds on June 14, 2018.

ACCRA was a 12-month project, led by Cenex, the UK’s first Centre of Excellence for low carbon technology, in partnership with Leeds City Council and Transport Systems Catapult. Using parts of Leeds Clean Air Zone, ACCRA used real time air pollution measurements, captured by EarthSense, to trigger zero-emission running mode in a 7.5-tonne Range Extended Electric Vehicle (REEV) when entering a designated control zone.

“This is a first – using real time data from both static and mobile sensors to create a dynamic air quality model. This model is then used to define the control zone or geofence, which automatically triggers zero emission running on the truck. This zone can be adjusted, in location, size and time duration, in line with the real time air quality status and in accordance with specific project objectives,” commented managing director of EarthSense Tom Hall.

“Project ACCRA has therefore successfully created a combination of technology and proven its potential to transform Leeds City Centre and save lives without additional charges to motorists or businesses.”

The recently completed Project ACCRA has developed the products and communication protocols that enable the transfer of data between plug-in vehicles and air quality sensors.

This data is then used by a Decision Making Engine to monitor, manage and control the location and duration of zero emission operation of plug-in hybrid and range-extended hybrid vehicles within a city centre or other designated zone. Other project partners include clean truck technology company Tevva and transportation network system developer Dynniq.

Check Also

Electrans 01052019 4

ZapGo and AS Green Cube Innovation enable ultra-fast charging units in Norway

The JV will provide charging rates between 350 kW to 1.2 MW A joint venture …

Leave a Reply

Your email address will not be published. Required fields are marked *